Transfer Tray P7031

This device has been designed for flush installation in counters. It is used indoors in banks, reception areas, and other cash handling areas, especially where a low counter height is present and therefore a particularly flat design is valued. The included brush seal makes the device nearly draft-free.

Safety

The transfer tray P7031 is manufactured with certified ballistic protection according to FB4. We would be happy to provide our test certificate for this.

Operation

The operation is manual. The tray and the opposing cover plate lock in the two end positions. The release occurs with the thumb on the lever located to the left of the sliding handle.

SITEC transfer tray P7031, closed, for checkout areas with low counter height

Construction and Execution

Sturdy steel construction with durable, maintenance-free mechanics. The cover frame and movable cover plate are abrasion-resistant, coated in black textured finish (RAL 9005 Jet Black), and the cash tray is made of stainless steel.

Installation

The device is inserted from above into the prepared cutout, with the surrounding edge covering the cut edges of the cutout. The cover edge can also be milled into the counter top for flush installation.

The device must be underbuilt to ensure that the weight of the transfer tray does not rest on the supporting edge. The possibility of later disassembly for maintenance or repair work must be ensured.

Intercom System

We recommend using our hands-free intercom system Delta 2.0 to ensure friendly communication between the operator and visitor.

Areas of Application

Banks, late counters, cash desks, reception, and security areas

Installation

Indoor use, counter installation – centrally under glazing

External Dimensions

Width 550 mm, Height 82 mm, Depth 500 mm

Pass Size

Cash tray W x H x D = 390 x 41 x 276 mm

Execution

RAL 9005 jet black, textured finish, other RAL colors or visible surfaces in stainless steel

Safety

FB 4 – NS according to DIN EN 1522 (also BGV C 9 / UVV-Cash)