Front-Opening Counter P7090
with Delta 2.0 Intercom System
This device has been designed for flush mounting in facades and partition walls. It is preferably used as a car counter in banks, petrol stations, and pharmacies, or as a service switch at reception desks and weighing stations. An intercom for communication between the inside and outside is integrated in the device.
Safety
The front-opening counter P7090 complies with the accident prevention regulations of the administrative trade associations BGV C9 (UVV-cash desks). At the customer’s request, the counter can be equipped with a bullet-resistant casing.
Operation
Operation is manual. The retractable tray is pushed out with a sliding lever, or pulled back and locks in both end positions. The front flap, which opens upwards, can then be used as a writing surface, e.g., for signing receipts. On the operator side, the switch is protected against drafts with an acrylic glass slider.
Construction and Design
Sturdy steel construction with durable structural coating. The cash tray is in the colour RAL 9005, jet black, the inner control panel in the colour RAL 7032, pebble grey. The front panel is standard in brushed stainless steel.
Integrated into the front-pening counter is a complete, plug-ready wired intercom system of the SITEC-DELTA type. As standard, a main unit (inside) is delivered as a table-top device. The control unit is to be installed under the counter top.
Installation
The device is inserted from the outside into the prepared wall opening. A stable support must be provided by the construction site.
Fixation is done with the mounting brackets included in the delivery, which are screwed to the side of the device and from below to the counter top provided by the construction site. To connect the integrated DELTA intercom, a 230-volt socket is required on the inside. The possibility of later disassembly for maintenance or repair work must be ensured.
Intercom
SITEC-DELTA is integrated.
Areas of Application
Banks, Cash Desks, Pharmacies, Weighing Stations
Installation
Flush with the front, in partition wall or facade
Wall Opening
W x H x D = 750 x 260 x 642 mm
Pass-through Size
W x H x D = 290 x 90 x 210 mm
Design
Outside stainless steel V2A, inside RAL 7032 pebble grey, numerical cart RAL 9005 jet black