Transfer Tray P7031
This device has been designed for flush installation in counters. It is used indoors in banks, reception areas, and other cash handling areas, especially where a low counter height is present and therefore a particularly flat design is valued. The included brush seal makes the device nearly draft-free.
Safety
The transfer tray P7031 is manufactured with certified ballistic protection according to FB4. We would be happy to provide our test certificate for this.
Operation
The operation is manual. The tray and the opposing cover plate lock in the two end positions. The release occurs with the thumb on the lever located to the left of the sliding handle.
Construction and Execution
Sturdy steel construction with durable, maintenance-free mechanics. The cover frame and movable cover plate are abrasion-resistant, coated in black textured finish (RAL 9005 Jet Black), and the cash tray is made of stainless steel.
Installation
The device is inserted from above into the prepared cutout, with the surrounding edge covering the cut edges of the cutout. The cover edge can also be milled into the counter top for flush installation.
The device must be underbuilt to ensure that the weight of the transfer tray does not rest on the supporting edge. The possibility of later disassembly for maintenance or repair work must be ensured.
Intercom System
We recommend using our hands-free intercom system Delta 2.0 to ensure friendly communication between the operator and visitor.
Areas of Application
Banks, late counters, cash desks, reception, and security areas
Installation
Indoor use, counter installation – centrally under glazing
External Dimensions
Width 550 mm, Height 82 mm, Depth 500 mm
Pass Size
Cash tray W x H x D = 390 x 41 x 276 mm
Execution
RAL 9005 jet black, textured finish, other RAL colors or visible surfaces in stainless steel
Safety
FB 4 – NS according to DIN EN 1522 (also BGV C 9 / UVV-Cash)