Motorized Gate P5100

Construction and Execution

This electronically driven motorized gate complements turnstile systems by allowing access for strollers or wheelchairs. The P5100 can be used as both an entrance or exit barrier and is also suitable for emergency exits. The rounded door leaf and the safety distances between moving and fixed parts ensure safe use of the P5100 motorized gate.

Function

In its basic state, the P5100 motorized gate is locked and is only released in the direction of travel after receiving a signal. In an emergency, the closed swing arm can be manually opened in the direction of escape, although the reset must be performed manually. An alarm signals during the emergency opening. The P5100 motorized gate is microprocessor-controlled. The integrated control can be designed for one-way and two-way operation and can be controlled via an on-site card reader, by pressing a button, or through an integrated infrared system.

SITEC Motorized Gate P5100, electronically operated, also suitable for strollers and wheelchairs

Construction and Execution

The P5100 motorized gate is made of stainless steel, providing high resilience. The frame of the P5100 is filled with transparent acrylic glass. The electronics are divided into two areas: the power supply and the control unit. The cable routing is done invisibly from the finished floor through the stand feet of the swing door.

Installation

The P5100 motorized gate is designed for indoor use and is mounted on the finished floor. With optional covering, the device can also be used outdoors. The power supply and any connecting cable to the control console come from below.

Areas of Use

Public areas with high visitor frequency

Example

Industrial and administrative buildings, events, leisure facilities, trade fairs, stadiums

Installation

Indoor and protected outdoor areas, installation on finished floor

External Dimensions

B x D x H = 1,040 x 300 x 1,050 mm

Passage Width

approx. 840 mm

Information / Downloads