This counter unit is completely equipped and ready to install into a pre-plastered wall aperture. It is used as cash desk, porter’s lodge or late-night-, box office-, pharmacy- or reception- counter and consists of the following components:
The P8020 is supplied with bullet-resistant glazing to BR 3-S, but can be fitted with any type of glazing up to BR 4-NS classification. The facade counter P7195 is tested in FB4-NS.
The unit is operated manually. The trolley can be pushed to the outside and back again by a simple operation of the respective hand lever. The trolley is locking in both final positions.
Steel frame in a textured-lacquered version in RAL 7035, light grey. The desk element is equipped with easily maintained, linen-faced stainless steel with an integrated facade counter P7195 with a height to give-through of 50 mm. The front cover is made of stainless steel V2a lacquered in RAL 7035. The glazing above is supplied as standard in bullet-resistance class BR3-S. A complete SITEC Delta 2.0 intercom, ready to plug in, is integrated into the glazed counter.
The P8020 glazed counter is supplied assembled and fully cabled. Remove the outer half of the frame and push it from outside into the wall aperture, press it in firmly and screw it into the surrounding wall. The inner half of the frame is then pushed in from the other side and screwed into the outer half of the frame. A 230 volt standard socket is required on the inside to connect the integrated Delta 2.0 intercom. Care should be taken that the unit can be easily disassembled should repairs or maintenance be required at a later stage.
|Application fields||Pay offices, late-night counters, pharmacies, ticket counters|
|Installation||Interior, in completely plastered wall|
|Wall opening||width x height x depth = 780 x 1.200 x variable mm|
|Pass-through size||width x height x depth = 310 x 50 x 200 mm|
|Version||Textured lacquering, light-Grey RAL 7035, other colours on request.|
|Bullet resistance||BVG C 9 (German UVV Kassen), glass in BR 3 - S or BR4-NS (according to DIN EN 1522)|