Transfer Tray P7032
This device was designed for flush mounting in counters. It is used indoors in banks, reception areas, and other cash handling areas, especially when only a shallow counter depth is available. Thanks to the supplied brush seal, the device is nearly draft-free.
Safety
The transfer tray P7032 is manufactured with certified ballistic resistance according to FB4. We are happy to provide you with our test certificate.
Operation
The operation is manual. The tray and the opposing cover plate lock in both end positions. The release is done with the thumb on the lever located to the left of the slide handle.
Construction and Design
Stable steel construction with a durable, maintenance-free mechanism. The cover frame and movable cover plate are abrasion-resistant, coated in black textured finish (RAL 9005 Jet Black). The cash tray and the included insert plate are made of stainless steel.
Installation
The device is installed from above into the prepared cut-out, with the surrounding edge covering the cut edges. The cover edge can also be milled into the counter top for flush-mounted installation.
The device must be underbuilt so that the weight of the transfer tray does not bear on the supporting edge. The possibility of later disassembly for maintenance or repair work must be ensured.
Intercom
We recommend using our hands-free intercom Delta 2.0 to ensure customer-friendly communication between the operator and the visitor.
Areas of Application
Banks, reception areas, cash desks, and counter systems
Installation
Indoor use, counter installation – centrally under glazing
External dimensions
Width 550 mm, Height 141 mm, Depth 500 mm
Pass-through dimensions
Cash tray
W x H x D = 390 x 30 x 272 mm with insert plate
W x H x D = 382 x 86 x 276 mm without insert plate
Design
RAL 9005 jet black, textured finish, other RAL colours or visible surfaces in stainless steel
Safety
FB 4 – NS according to DIN EN 1522 (also BGV C 9 / UVV-Cash desks)