Link:SITEC>Products>Locks for Material and Money

MONEY and GOODS TRANSFER UNITS

SITEC manufactures money and goods transfer units. These are mainly used for money deliveries at national banks, and financial institutions and concerns. However, goods transfer units are also required in industrial companies,  such as e.g. chip card production or in data processing companies.
In this section you will find units which can be installed in a counter, facade or partition wall.

There are transfer units for a wide variety of applications and structural conditions. We can offer many standard solutions - but we also, of course, make to customer requirements.
The transfer units can be supplied complete with glazed counters, our DELTA intercom or a suitable cash trolley.

The transfer units are available up to the highest security classifications for bullet, break-in and fire resistance.

Please contact us for further details.

 

Drehschleuse geöffnet
Ansicht vom Kundenbereich - geschlossen
Bank Austria in Wien
Bis Beschussklasse FB 7

P8041

P 8041 - Transfer Unit

up

ready-to-install for indoor use
with bullet-resistant glazing to BR3-S in a surrounding steel frame with a textured, lacquered finsih, counter surface in linen-faced stainless steel with integrated Transfer Tray P 7032 FB4, Intercom System DELTA ready-to-plug-in and Container Lock P 9045 with doors based on FB4.

 

Suitable for:

Security areas of financial institutes, central banks, security companies, goods issue, data processing centres

Installation:

in completely plastered brick wall or partition wall

Wall opening:

W x H x D = 1.000 x 2.000 x strength of wall ..... mm

Pass-through size:

W x H x D = 680 x 923 x 896 mm

Execution:

Textured, lacquered finish in light-grey RAL 7035, special colours on request

Bullet-resistance class:

German standard BVG C 9 (UVV-Kassen), glass in BR 3 - S, Transfer Tray and Doors of Container Lock based on FB4 (DIN EN 1522)

More information:

Show PDF!

P8051

P 8051 - Transfer Unit

up

ready-to-install for indoor use
with bullet-resistant glazing to BR3-S in a surrounding steel frame with a textured, lacquered finish, counter surface in linen-faced stainless steel with integrated Transfer Tray P 7032 in bullet-resistance class  FB4, Intercom System DELTA 2.0 ready-to-plug-in and Trolley Lock P 9050 with doors based on FB4.

 

Suitable for:

Material supply in companies, security areas of financial institutes, central banks, security companies, medium distribution in data processing centres, etc.

Installation:

in completely plastered brick wall or partition wall

Wall opening:

W x H x D = 1.000 x 2.000 x strength of wall ..... mm

Pass-through size:

W x H x D = 454 x 504 x 600 mm

Execution:

Textured, lacquered finish in light-grey RAL 7035, special colours on request

Bullet-resistance class:

German standard BVG C 9 (UVV-Kassen), glass in BR 3 - S, Transfer Tray and Doors of Trolley Lock based on FB4 (DIN EN 1522)

More information:

Show PDF!

P8140

P 8140 - Transfer Unit

up

As a flush-mounted counter, completely ready-to install. With bullet-resistant glazing to    BR3-S in a surrounding steel frame with a textured, lacquered finish, counter surface in linen-faced stainless steel with integrated, flush-mounted  front-opening tray P 7097 in FB 4, Intercom System DELTA ready- to-plug-in and Container Lock P 9045 with doors based on FB 4

 

Suitable for:

Security areas of financial institutions, central banks, security companies, goods issue, data processing companies

Installation:

in completely plastered brick wall or partition wall

Wall opening:

W x H x D = 1000 x 2000 x strength of wall ... mm

Drive-through size:

W x H x D = 660 x 815 x 900 mm

Execution:

Textured, lacquered finish in light-grey RAL 7035, special colours on request

Bullet-resistance class:

German standard BVG C9 (UVV-Kassen), glass in BR 3-S,    front-opening tray and doors of container lock based on FB 4 (DIN EN 1522)

More information:

Show PDF !

P9020

P 9020 - Container Lock

up

Material lock with two sliding doors that open in turns, with electronic drive for driving-through transport trays. For installation into table desk or wall.

 

Suitable for:

banks, financial institutions, security companies, data processing companies

Installation:

Inside table desk or completely plastered wall

Outer size:

W x H x D = 1750 x 995 x 1000 mm

Pass-through size:

W X H x D = 680 x 915 x 900 mm

Execution:

Textured, lacquered finish in deep black, RAL 9005

Bullet-resistance class:

Based on FB 4 - NS and FB 6 - NS

More information:

Please let us have your inquiry

P9045

P 9045 - Container Lock

up

Material Lock with two revolving doors that open in turns, with electronic door control to drive through trolleys for money and material. Protection strips at the doors and inner sides prevent from damaging the lock by trolleys. For installation into table desk or wall.
 

Suitable for:

Banks, Financial Institutes, Security Companies, Data Processing Centres

Installation:

Inside into table desk or completely plastered wall

Wall opening:

W x H x D = 840 x 978 x 992 mm

Pass-through size:

W x H x T = 680 x 928 x 900 mm

Execution:

Frame and doors textured, lacquered finish in RAL 9005, jet black; casing and buffer strips in V2a stainless steel

Bullet-resistance class:

Doors based on FB 4 - NS and FB 6 - NS

More information:

show PDF

P9050

P 9050 - Container Lock

up

Material lock with two double wing doors that open in turns, with electronic door control.

 

Suitable for:

banks, financial institutions, security companies, data processing companies

Installation:

Indoors table desk or completely plastered wall

Outer size:

W x H x D = 644 x 644 x 600 mm

Pass-through size:

W x H x D = 454 x 504 x 500 mm

Execution:

textured, lacquered finish in deep black, RAL 9005

Bullet-resistance class:

Doors based on FB 4 - NS and FB 6 - NS

More information:

Show PDF!

P9060

P 9060 - Container Lock

up

Material lock with two double wing doors that open in turns, with electronic door control

 

Suitable for:

banks, financial insitutions, security companies, data processing companies

Installation:

Inside table desk or completely plasterd wall

Outer size:

W x H x D = 844 x 844 x 800 mm

Pass-through size:

W x H x D = 654 x 704 x 700 mm

Execution:

textured, lacquered finish in deep black, RAL 9005

Bullet-resistance class:

Doors based on FB 4 - NS and FB 6 - NS

More information:

Show PDF!

P9000

P 9000 - Material- and Money Lock

up

Lock with 2 counter-moving lifting windows with electronic drive for installation onto a table desk.

 

Suitable for:

National- and major banks, cash transport companies, financial institutions, data processing companies

Installation:

Inside, on top of a counter

Wall opening:

W 1460 mm, D 954 mm, H 1950 mm

Pass-through size:

W 1200 mm, D 640 mm, H 840 mm

Execution:

according to customer's request

Bullet-resistance class:

up to FB 7

More Information:

show PDF

P9400

P 9400 - Combination Lock

up

for transport trays, money and parcels. Consisting of container lock P 9040 and on-desk lock P 9000. On-desk lock with double wing doors which are bolt against each other; P 9000 with two electronic driven bullet-proof glazing, lifting windows that open upwards in turns.

 

Suitable for:

National and major banks, cash transport companies, financial institutions

Installation:

indoors into brickwork or partition walls onto finished floor

Outer size:

W 1460 mm, D 954 mm, H 3000 mm

Pass-through size: Container lock P 9040:

W 900 mm, D 1 160 mm, H 945 mm

Pass-through size: On-desk lock P 9000:

W 1190 mm, D 640 mm, H 840 mm

Bullet-resistance class:

up to FB 6

More information:

Please let us have your inquiry

P9500

P 9500 - Material and Money Lock

 up

Combination lock with two double wing swing doors with electronic drive for the installation on the floor. Moveable counter desk inside. Suitable for passing-through luggage, transport trays and partly also for passengers.

 

Suitable for:

National and major banks, financial institutions, cash transport companies, data processing companies

Installation:

indoors in walls on finished floor

Outer size:

approx. W 1480 mm, D 1600 mm, H 2300 mm

Footprint inside:

approx. W 950, D 1200 mm, H 2000 mm

Execution:

depends on customer's wish

Bullet-resistance class:

following FB4/BR4-NS or FB6/BR6-NS

More information:

Show PDF!

P9600

P 9600 - Material and Money Lock

up

Combination lock with a rotation cylinder inside with electronic drive for installation on the floor. Moveable counter desk inside. Suitable for passing-through luggage, transport trays and partly also for passengers.

 

Suitable for:

National and major banks, financial institutions, cash transport companies, data processing companies

Installation:

Indoors in walls on finished floor

Outer size:

W 1760 mm, D 1760 mm, H 2600 mm

Pass-through size:

W 790 mm, D 1000 mm, H 2000 mm

Execution:

depends on customer's wish

Bullet-proof resistance:

up to FB 6

More information:

Please let us have your inquiry

P9600Y

P 9600 - Material and Money Lock

up

Combination lock with a rotation cylinder inside with electronic drive. As Y-lock for 3 ways. Moveable counter desk inside. Suitable for passing-through luggage, transport trays and partly for passengers.

 

Suitable for:

National and major banks, financial institutions, cash transport companies, data processing companies

Insallation:

Indoors in walls on finished floor

Outer size:

W 1760 mm, D 1760 mm, H 2600 mm

Pass-through size:

W 790 mm, D 1000 mm, H 2000 mm

Execution:

depends on customer's wish

Bullet-resistance class:

up to FB 6

More information:

Please let us have your inquiry

P9240

P 9240 - Container and Rotation Lock

up

Material lock with vertical rotation cylinder with electronic drive for driving-through materials, for installation into table-desk or wall. Mechanical drive.

 

Suitable for:

banks, financial institutions, cash transport companies, data processing companies

Installation:

indoors in table desks or walls

Outer size:

W 1120 mm, D 1000 mm, H 1190 mm

Pass-through size:

W 660 mm, D 645 mm, H 1000 mm

Execution:

stainless steel, or textured, lacquered finish

More information:

Show PDF